Command Categories - Teledyne HS-40-04k40 User Manual

Piranha HS-xx RoHS User Manual

4.2 Command Categories

The follow ing d iagram categorizes and lists all of the cam er a's com m and s. This chapter is
organized by com m and category.
Figure 18: Command Categories
Sensor Output Format
TDI or Area Mode (tdi)
Number of Integration Stages (stg)
CCD Shift Direction (scd)
Binning (sbv and sbh)
Set Exposure Mode (sem)
Set Frame/Line Rate (ssf)
Camera Output Format
Camera Link Mode (clm)
Camera Throughput (sot)
Pixel Readout Direction (smm)
Generate a Test Pattern (svm)
Set Upper Threshold (sut)
Set Lower Threshold (slt)
End of Line Sequence (els)
Set Pretrigger (spt)
Data Processing
Region of Interest (roi)
Set Analog Gain (sag or ccg)
Update Gain Reference (ugr)
Set Analog Offset (sao)
Calibrate Analog Offset (cao)
Correction Set Sample (css)
Calculate FPN (ccf)
Set Digital Offset (sdo)
Calculate PRNU (ccp)
Calculate PRNU Algorithm (cpa)
Enable Pixel Coefficients (epc)
Set PRNU Coefficient (spc)
Set FPN Coefficient (sfc)
Set PRNU Range (spr)
Set FPM Range (sfr)
Set Background Subtract (ssb)
Set Digital System Gain (ssg)
Teledyne DALSA
Saving and Restoring Settings
Save Current User Settings (wus)
Restore Previously Saved User Settings (rus)
Save Current PRNU Coefficients (wpc)
Save Current FPN Coefficients (wfc)
Load Pixel Coefficients (lpc)
Reset Pixel Coefficients (rpc)
Restore Factory Settings (rfs)
Reboot Camera (rc)
Diagnostics
Get Line of Data (gl)
Get an Average of Multiple Lines (gla)
Display Pixel Coefficients (dpc)
Measure Internal Temperature (vt)
Measure Input Voltage (vv)
Get Commands
Other
Help (h)
Set Baud Rate (sbr)
33
03-032-20013-04