Operation; Select Color-Mode; Internal Programs-Mode; Auto-Mode - EuroLite DMX LED Operator 4 User Manual

016 - LED PARCAN 4
021 - LED KLS-200 RGB
036 - LED Bar RGB 252/10
049 - Smoke-machine
Now you can start operating them via your DMX LED Operator 4.
Please note: you can either control 1-4 PARCANS or the KLS-200 or LED Bar. You can always control the
smoke-machine additionally on channel 49/50.

6. OPERATION

Connect the connection cable of the power-unit with the DC IN-socket. Plug the power unit into your outlet.
After you connected the device to the mains, the DMX LED Operator 4 is ready for use.

6.1 Select Color-Mode

In the Select Color-Mode, you can call up the individual colors manually via the color buttons under „Hold
Colors" as well as via the channel faders R, G, B.
Press the COLOR SELECT-button - the LED lites up green.
Press the button of the desired color.
Press the Up-/Down buttons in order to select from the different devices.
PAR 1-4 means Parcan 1-4
KLS-200 1P means Channels 1-6 of KLS-200
KLS-200 2P 3P means Channels 7-12 of KLS-200
KLS-200 4P means Channels 13-15 of KLS-200
LED BAR 1S means Channels 1-6 of LED Bar
LED BAR 2S 3S means Channels 7-12 of LED Bar

6.2 Internal Programs-Mode

In the Internal Programs-Mode, you can call up the internal programs.
Press the PROG SELECT-button - the LED lites up yellow.
Push the Prog Select-channel-fader to the desired program. (See below, 6.7)
Push the Speed-channel-fader to the desired speed. (Void with static settings).
Push the Flash/Sensitivity-channel-fader to the desired Flash-Frequency. (In Sound Control Mode, this fader
serves as sensitivity adjustment).

6.3 Auto-Mode

In the Auto-Mode, you can call up the auto program as an endless loop.
Press the AUTO-button - the LED lites up green.
Push the Speed-channel-fader to the desired speed.
Push the Flash/Sensitivity-channel-fader to the desired Flash-Frequency.
The Prog Select-channel-fader is void in this mode.

6.4 Sound Control-Mode

The sound-control works via the built-in microphone.
Press the SOUND ACTIVE-button - the LED lites up red.
Push the Flash/Sensitivity-channel-fader to the desired sensitivity.
The Prog Select-channel-fader and the Speed-channel-fader are void in this mode.

6.5 Hold

Via this button, the Pause Function is set.
Press the HOLD-button - the LED lites up red.
You can activate the Pause Function in any mode.

6.6 Blackout-Modus

Press the BLACKOUT-button and all devices will be set to Blackout-mode.
The Blackout LED lites up yellow.
14/15 00048173.DOC, Version 1.0