Boost Menu; Battery Backup - Jandy AquaPalm Installation And Operation Manual

Page 16
MAIN MENU
SET TEMP
SET TIME
PALM OPTIONS
back
select
1 2
ASSIGN HOTKEYS
1 AUX1
2 AUX2
Choose setting
and press SELECT.
back
select
1 2
ASSIGN HOTKEYS
1 AUX3
2 AUX2
Choose setting
and press SELECT.
back
select
1 2
Figure 25. AquaPalm Options Menu - Assign
Hotkeys
To change the Hotkeys setting
Highlight MENU and press SELECT. Highlight
PALM OPTIONS and press SELECT. Highlight
ASSIGN HOTKEYS and press SELECT. Highlight
1 or 2 and press SELECT. Use the UP/DOWN arrow
keys to change the setting. Then press the SELECT
button to continue. In order to assigh Hotkeys as
a OneTouch Mood setting, the OneTouch Mood
settings must be set up first.
5.15

Boost Menu

NOTE This equipment may not be part of your system.
Please check with your installer.
MENU > BOOST > START
Activates the BOOST feature that will operate the
AquaPure Chlorine Generator at 100% output for
24 hours. Boost mode will override all programs,
all-off settings, as well as manual operation of the
filter pump.
PALM OPTIONS
SET AUTO-OFF
BACKLIGHT
ASSIGN HOTKEYS
Choose setting
and press SELECT.
back
select
1 2
HOTKEY #1
FILTER PUMP
SPA
POOL HEAT
SPA HEAT
SOLAR HEAT
AUX 1
AUX 2
AUX 3
MORE
back
select
1 2
MAIN MENU
SET TEMP
SET TIME
SET AQUAPURE
PALM OPTIONS
BOOST POOL
back
select
1 2
Figure 26. Boost Menu - Start
To use the Boost menu
Highlight MENU and press SELECT, highlight
BOOST and press SELECT. Highlight START and
press SELECT to begin the chlorination cycle.
Use SET AQUAPURE in MENU to set the percentage
and the AQUAPURE HOURS in SYSTEM SETUP
to set the hours of operation.
MAIN MENU
SET TEMP
SET TIME
SET AQUAPURE
PALM OPTIONS
BOOST POOL
back
select
1 2
Figure 27. Boost Menu - Pause or Stop
To pause or stop BOOST mode, highlight MENU
and press SELECT. Highlight BOOST and press
SELECT. Highlight PAUSE or STOP and press
SELECT.
5.16

Battery Backup

A nine-volt battery is located at the power center. The
battery keeps the clock running during a power outage
so the time and date will be correct when power is
restored. Programming will not be lost even if the
battery is dead. Do not install the battery in the power
center until the system is ready to operate. Battery
will drain if power is left off.
BOOST POOL
Operates the
AQUAPURE
Chlorinator
at 100%
for 24 hrs.
START
GO BACK
back
select
1 2
BOOST POOL
TIME REMAINING
24:00
PAUSE
RESTART
STOP
back
select
1 2