Table of Contents
Advertisement
Page 10
4.3
Battery Status
The Battery icon
the display screen, indicates the status of the battery.
The AquaPalm Handheld Remote uses two (2) AA
batteries. The batteries are located behind the cover
on the back side of the Handheld Remote. If the
batteries have full or sufficient charge, the icon will
appear on the display screen as
need to be replaced, the icon will consistently blink
and appear as
.
4.4
Signal Strength
The Signal Strength icon
of the display screen, indicates the signal strength
available from the Transceiver J-box to the AquaPalm
Handheld Remote. Signal strength is affected (lowered)
as the AquaPalm Handheld Remote is moved farther
away from the Transceiver J-Box. Also, obstructions,
such as walls or other wireless products, can lower
the signal strength if located between the AquaPalm
Handheld Remote and the Transceiver J-Box. The
Transceiver J-box must also be installed at least 6 feet
off the ground, 8 feet away from equipment, and the
antenna pointing towards the sky.
Section 5. AquaPalm Handheld
Remote Menus
5.1
Pool Mode/Spa Mode
When POOL MODE is selected, valve actuators
turn the valves to pool return (pool/spa combination
systems) and the filter pump turns on. If POOL HEAT
is enabled, the heater will fire and heat the water to
the set temperature.
When SPA MODE is selected, the valve actuators
rotate to allow flow to the spa (pool/spa combination
systems) and the filter pump is turned on. If SPA
HEAT is enabled, the heater will fire and heat the
water to the set temperature.
, located on the left corner of
. If the batteries
, located on the left corner
FRI 10:30 PM
AIR
POOL
80°
78°
POOL MODE
ON
POOL HEATER
ENA
SPA MODE
OFF
SPA HEATER
OFF
MENU
EQUIPMENT ON/OFF
back
select
1
2
Figure 11. Pool Mode and Spa Mode Menus
5.2 Equipment On/Off Menu
EQUIPMENT ON/OFF > ALL OFF
Use this menu to turn a piece of equipment on or
off. The ALL OFF mode will turn off equipment
that has been turned on by any means (manual or
pre-programmed). This includes any of the heater
enables that were on (unless in use by the Maintain
function).
FRI 10:30 PM
AIR
POOL
80°
78°
POOL MODE
ON
POOL HEATER
ON
SPA MODE
OFF
SPA HEATER
OFF
MENU
EQUIPMENT ON/OFF
back
select
1
2
Figure 12. Equipment On/Off Menu - All Off
To use Equipment On/Off
1.
Highlight EQUIPMENT ON/OFF and press
SELECT. To highlight an item, use the UP/
DOWN arrow keys. Use the SELECT button
to turn the equipment on or off. Return to the
main menu by using the BACK button, or
use the UP/DOWN arrow keys to highlight
another device.
2.
Highlight ALL OFF and press SELECT. After
using ALL OFF, return to the main menu by
using the BACK button.
FRI 10:30 PM
AIR
SPA
80°
104°
POOL MODE
OFF
POOL HEATER
OFF
SPA MODE
ON
SPA HEATER
ENA
MENU
EQUIPMENT ON/OFF
back
select
1
2
EQUIPMENT
ALL OFF
FILTER PUMP
OFF
SPA
OFF
POOL HEAT
OFF
SPA HEAT
OFF
AUX 1
OFF
AUX 2
OFF
AUX 3
OFF
MORE
back
select
1
2
Hide quick links:
Advertisement
Table of Contents
