Auto Shut-Off Menu; Backlight Menu; Assign Hotkeys Menu - Jandy AquaPalm Installation And Operation Manual

MAIN MENU
SET TEMP
SET TIME
SET AQUAPURE
PALM OPTIONS
BOOST
back
select
1 2
Figure 22. Set AquaPure Menu
5.12

Auto Shut-off Menu

MENU > PALM OPTIONS > SET AUTO-OFF > Set Time
The AUTO-OFF feature of the handheld remote can
be set to a two (2) minute, five (5) minute, or ten (10)
minute auto shut off. The display can be re-enabled
by pressing the Power ON/OFF button.
NOTE AquaPalm default is set to two (2) minutes.
MAIN MENU
SET TEMP
SET TIME
PALM OPTIONS
back
select
1 2
SET AUTO-OFF
2 MINUTES
5 MINUTES
10 MINUTES
Use ARROW KEYS
to set value.
Press SELECT
to continue.
back
select
1 2
Figure 23. AquaPalm Options Menu - Auto-Off
To change the Auto Shut-off Time
Highlight MENU and press SELECT. Highlight
PALM OPTIONS and press SELECT. Highlight SET
AUTO-OFF and press SELECT. Use the UP/DOWN
arrow keys to set the time out value. Then press the
SELECT button to continue.
SET AQUAPURE
SET TO 0%
Use ARROW KEYS
to set value.
Press SELECT
to continue.
back
select
1 2
PALM OPTIONS
SET AUTO-OFF
BACKLIGHT
ASSIGN HOTKEYS
Choose setting
and press SELECT.
back
select
1 2
5.13

Backlight Menu

MENU > PALM OPTIONS > BACKLIGHT
The backlight can be turned on and off. Leaving the
backlight turned off will extend the battery life.
NOTE Backlight default setting is set to OFF.
MAIN MENU
SET TEMP
SET TIME
PALM OPTIONS
back
select
1 2
BACKLIGHT
LIGHT ON
LIGHT OFF
Choose setting
and press SELECT.
back
select
1 2
Figure 24. AquaPalm Options Menu - Backlight
To change the Backlight setting
Highlight MENU and press SELECT. Highlight
PALM OPTIONS and press SELECT. Highlight
BACKLIGHT and press SELECT. Use the UP/
DOWN arrow keys to change the setting. Then press
the SELECT button to continue.
5.14

Assign Hotkeys Menu

MENU > PALM OPTIONS > ASSIGN HOTKEYS > 1 or 2 >
Select desired AUX
The 1 and 2 buttons on the AquaPalm Handheld
Remote can be assigned to any piece of equipment
connected to a circuit or relay, or a OneTouch Mood
setting. This provides immediate and dedicated
control of the assigned equipment.
NOTE The default setting is AUX1 for button 1 and AUX2
for button 2.
Page 15
PALM OPTIONS
SET AUTO-OFF
BACKLIGHT
ASSIGN HOTKEYS
Choose setting
and press SELECT.
back
select
1 2