Control Panel; Adjustments - Ferroli Domina F 24-30 E Technical Manual

DOMINA F 24 - 30 E
FERELLA F 24 - 30 MEL
MILOS AIR COMPACT E

3.3 Control panel

3.4 Adjustments

Room temperature adjustment (with room thermostat on)
Using the room thermostat or remote control, set the temperature desired in the rooms. Controlled by
the room thermostat, the boiler lights and heats the system water to the set system delivery setpoint
temperature. The generator turns off when the desired temperature in the rooms is reached.
If the room thermostat or the remote control are not installed the boiler will keep the system at the set
system delivery setpoint temperature.
System temperature adjustment
With knob “B” on the control panel we can set the required system temperature. To prevent localized
condensation on the fume circuit, we recommend a minimum temperature of 60°C.
Hot water temperature adjustment
With knob “C” on the control panel we can set the tap water temperature from 40°C to 55°C (62°C on
inserting jumper JP03).
Summer/Winter selection
Setting the adjustment potentiometer “B” to minimum (), the boiler works on “Summer”.
Adjusting the heating t by changing the circulator delivery-head
The temperature difference t (difference between the system delivery and return heating water
temperatures) must be under 20°C and is obtained by changing the circulator delivery-head with its
variable speed device (or switch).
Version - 09.2002
32
Supplied By www.heating spares.co Tel. 0161 620 6677