Working Height; Noise Level; Electrical Data - Robot Coupe R 101 XL Operating Instructions Manual

• WORKING HEIGHT

We recommend that you position the food processor
on a stable worktop so that the upper edge of the
large feed hopper is at a height of between 1.20 m
and 1.30 m.

• NOISE LEVEL

The equivalent continuous sound level when the food
processor is operating on no-load is less than 70
dB(A).

• eLectricaL Data

Single phase machine r 101 XL
Motor Speed (Rpm)
230 V/50 Hz 1500
115 V/60 Hz 1800
220 V/60 Hz 1800
Single phase machine R 201 XL • R 201 XL Ultra
Motor Speed (Rpm)
230 V/50 Hz 1500
115 V/60 Hz 1800
220 V/60 Hz 1800
Single phase machine R 211 XL • 211 XL Ultra
Motor Speed (Rpm)
230 V/50 Hz 1500
115 V/60 Hz 1800
220 V/60 Hz 1800
- power shown on data plate.
10
W a r n i n g
the blades are extremely sharp.
The R 211/R 211 Ultra are fitted with an
electromechanical safety system.
As soon as you open the lid, the motor stops.
To restart the machine, simply close the lid and press
the green switch on.
In order to avoid splash when processing liquid
preparation in the cutter bowl, we recommend you
Intensity (Amp.)
to stop the machine before opening the lid.
3
The R 101 XL • R 201 XL • R 201 XL Ultra • R 211
6
XL • R 211 XL Ultra are fitted with a temperature
3
thermal protector which automatically stops the
motor when the machine is left on for too long or is
overloaded.
If this happens, allow the machine to cool completely
Intensity (Amp.)
before restarting it.
4.3
8
r e M e M B e r
4.3
never try to override the locking and safety
systems.
never introduce any object into the container
where the food is being processed.
Intensity (Amp.)
never push the ingredients down with your
5.7
hand.
Do not overload the appliance.
12
never switch the appliance on while it is empty.
5.7
saFetY
Handle with care.
Consult the declaration of compliance on page 2.
stanDarDs