Attaching/Detaching The Stand - Datalogic Gryphon I GPS4400 Product Reference Manual

Attaching Reader to Host

Attaching/Detaching the Stand

The reader can be removed or attached to the stand simply by snapping on
or off. To attach, align the holes on the bottom of the scanner with the
posts on the stand and push down to snap in place. To remove, just pull
straight up to detach the reader from the stand.
For product dimensional information, see
and
GPS4400 Dimensions
The stand can also be mounted to a stationary surface using two screws.
See
Appendix G, Screw Mounting Template
shows screw placement.
Product Reference Guide
on page 269.
Attaching/
Detaching
the Stand
Technical Specifications
for a full-scale template that
Top of Stand
Setup
on page 263
Screw holes
7