Standard 2 Of 5 Set Length 1 - Datalogic Gryphon I GPS4400 Product Reference Manual

Enter/Exit Programming Mode

Standard 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
Control. Length 1 is the minimum label length if in
the first fixed length if in
check and data characters. The length can be set from 1 to 50 characters.
Table 9
want detailed instructions on setting this feature.
Table 9. Standard 2 of 5 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT STANDARD 2 OF 5 LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CS2L1
Select Standard 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
130
Fixed Length
provides some examples for setting Length 1. See
EXAMPLES
01 Character
'0' and '1'
08 = Length 1 is 8 Characters
DEFAULT
Variable Length
Mode. Length includes the bar code's
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
CANCEL
1D Symbologies
Standard 2 of 5 Length
Mode, or
if you
page 241
50 Characters
'5' AND '0'
Gryphon™ GPS4400