Glossary - Axis A20 Manual

4-18

Glossary

AFT:
BEAM:
BILGE:
BOW:
BULKHEAD:
CHINE:
DEADRISE:
DECK:
DRAFT:
FibECS II:
FIBERGLASS:
GELCOAT:
GUNNEL:
HELM:
HULL:
KEEL:
LIFTING STRAKES:
PORT:
STARBOARD:
STERN:
STRINGER:
TRANSOM:
WAKE:
WORKING DECK
To the rear of the boat near the stern. Generally used to give
directions.
The widest portion of the hull.
The lowest portion inside the boat. This is generally the
section directly below the engine compartment.
The forward portion of the boat.
Vertical portion in a boat.
The intersection of the sides and bottom of a "V" bottom boat.
The degree of angle from the keel to the chine.
Upper structure which covers the hull.
Vertical distance from the waterline of the boat to the lowest
part of the boat.
An engine mounting method, using fiberglass instead of other
materials such as aluminum or steel; patented by Axis Boats
LLC. that provides major reduction in noise and vibration.
Fibers similar to wool or cotton, but made from fibrous glass.
Glass fiber forms include cloth, yarn, mat, milled fibers,
chopped strands, roving and woven roving.
A surface, either colored or clear, providing a cosmetic
enhancement and exposure improvements to a fiberglass
laminate.
The upper edge of a boat's side.
Device attached to rudder for steering a vessel.
The bottom section of the boat.
The lowest most portion of the bottom of the boat.
Strips molded or attached to the surface of a hull designed to
create lift as speed and pressure increase with the static water.
To the left side of the boat, when facing the bow.
To the right side of the boat, when facing the bow.
To the rear of the boat.
Longitudinal members that are fastened inside the hull of the
boat which provide structural integrity.
The area forming the stern, or rear, of a boat.
The track or path a boat leaves behind while in motion.
Floor within cockpit or bow area.
Care and Maintenance