Axis A20 Manual page 73

Hide thumbs Also See for Axis A20:
Table of Contents

Advertisement

4-14
Winterization Re-Commission
Remove boat cover or shrink-wrap from boat.
Remove Duct tape from exhaust flaps.
Charge and install battery in boat. Follow all safety precautions associated with
changing batteries.
De-winterize engine using engine manufacturer's specifications.
Check propeller shaft alignment. Tighten coupling hardware.
Check engine compartment for nesting animals. Clean as needed.
Reinstall seat cushions from storage.
Check entire engine for signs of cracks caused by freeze damage. Check all hose
clamps for tightness. Install bilge drain plugs: transom, T-handle plug and ski
locker drain plug.
Reinstall propeller assembly.
If not performed during winterization, perform annual maintenance at this time.
If boat is equipped with optional fresh-water cooling, and was drained at
winterization, fill at this time.
Turn key on and off 2-3 times to allow fuel to return to engine, then start engine.
When engine starts, watch gauges closely, and watch for abnormal readings.
Care and Maintenance

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Axis a22

Table of Contents