2-4
Circuit Breakers
All major boat circuits are protected from shorting and overload by resettable circuit
breakers. If a problem develops with one of the following circuits, switch off the circuit
and wait about one minute. Then push the appropriate breaker button fully and switch on
the circuit. If the circuit continues to trip, there is a problem somewhere in the system.
See your dealership immediately to locate the problem.
Figure 2-4. Circuit Breaker Panels
Switches & Indicators
Accessory Switch Panels
These panels are located in the dash directly below the standard gauges and are used to
activate the following features. You will find the feature or accessory provided within
each button face for description.
•
Horn
•
Navigation/Anchor Lights
•
Interior/Dash Lights
•
Blower
•
Bilge Pump
•
Docking Lights
•
Center Ballast
Figure 2-5. Accessory Switch Panel
•
Left, Rear Ballast
•
Right, Rear Ballast
•
Accessory
•
Accessory
•
Info Adjustment
•
Speed/RPM Adjustment
•
Cruise ON/OFF
IGNITION SWITCH
Gauges & Controls