Table of Contents
Advertisement
6.2.4 Clear Avoided Road
If you do not wish to use the alternative routes offered by Snooper and you wish to return to the original calculated route, press the
'Clear Avoided Road' button and the original route plotted by Snooper will be restored.
Once the re-calculation of the original route is complete the summary screen is displayed. Once the calculation is complete you can
either press 'Go' to start navigation, 'Simulation' to see the actual route that will be taken, 'Route Option' to change the parameters
of the route or 'Guide' which will list the turn by turn instructions of the journey. The 'Summary Screen' will tell you the distance to
your destination, estimated time of arrival and the estimated time it will take to complete your journey.
Please Note: If you have already travelled some of the re-calculated route, Snooper may produce a slightly different route from
what was originally plotted.
The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with
turn-by-turn instructions.
If the 'Avoid by Road' and 'Avoid by Range' have not been used, this feature is unavailable and the button will be greyed out.
6.3
Navigate Via Location
If you would like to calculate a route to a destination but want to go via a
specific location along the way you can use this function. Simply input the
details of your final destination as usual but press the 'Route Option' button
in the summary screen and then select the 'Navigate Via Location' button.
You are provided with the following search options:
Find address by City
●
●
Find address by post code
●
●
Find by POI
●
●
Find by recently used
●
●
To find out how to use these options please refer to the applicable sections in this user manual.
Once you have found the address or location you would like to go to via your
route, press the 'Set' button. A red tick is now displayed on the 'Navigate
Via Location' button.
Now press the 'Done' button followed by the 'Calculate' button.
If you would like to check the route calculated prior to departure, press the
'Guide' button on the Summary screen which will give you a list of each turn
by turn instruction from the start of your journey to the end.
Return to contents
Engineered by
74 • EN
Cobra Series EN v1.106.15
Advertisement
Table of Contents
