3.
Planning a route
There are several ways to plan a route on Snooper.
3.1
Find by post code
Press the centre of the screen to access the 'Navigate to' menu.
●
●
Press the 'Find by post code' icon.
●
●
If you have the European version of Snooper, you will need to select
●
●
the 'Country' first BEFORE typing the postcode. (If the correct
country is already displayed, go to the next step). Use the arrow
keys on the right of the display to scroll up and down the country
options. Select the country with your finger.
Press 'Post code' and enter the full postcode using the onscreen keyboard.
●
●
Press the 'OK' button on the keyboard.
●
●
Please Note: The button on the keyboard with no character on it is the 'Space' key. UK post codes can be entered with and
without a space.
If the following message is displayed 'Please, input correct postcode',
the postcode has been entered incorrectly. Press OK and retype the
postcode.
Snooper will display a screen showing the postcode and the street
●
●
name.
If you know the house/property number of your destination, press
●
●
the
button to enter it .
Once you have entered the house number press the 'OK' button.
●
●
Alternatively, if you do not have a house or building number, you
●
●
can navigate to a point where two roads meet instead.
Press the 'Intersection' button and select the road
NOTE: For Truckmate or Ventura models you can select the vehicle type before the journey is calculated.
Press the 'Calculate' button.
●
●
Return to contents
.
Engineered by
23 • EN
Cobra Series EN v1.106.15