Table of Contents
Advertisement
5.6.13
Route Alert
If you deviate from the calculated route, Snooper will automatically
recalculate a route without any user intervention. To indicate rerouting
is in progress Snooper will emit an audible tone.
You can choose between the following options:
Yes: The re-route tone will be emitted during recalculation.
No: No re-route tone will be emitted.
To make your selection, touch the relevant radio button.
5.6.14
Auto Scale
Auto Scale is switched 'On' by default during manufacture. Auto
Scale automatically magnifies the map as you approach a junction or
roundabout, where you may need to make a turning, so that you can
see it in more detail.
Auto Scale can be turned on and off as you wish.
The screen will show two options 'Yes' and 'No'. To make your selection,
touch the relevant radio button.
To save the changes press the 'OK' button at the bottom of the display.
If you wish to keep the settings unchanged you can exit the 'Setup' menu by pressing the return arrow
bottom right hand corner of the display.
5.6.15.1 My Speed
The speed limit of nearly every road across Europe can now be clearly
displayed on your Snooper at all times.
To select the correct speed limits for your vehicle type:
Car - Advisory speed limits for a vehicle will be displayed
Caravan - Advisory speed limits for a vehicle towing a caravan will be displayed
Motorhome - Advisory speed limits for motor homes will be displayed
Truck 3.5t - 7.5t - Advisory speed limits for vehicles from 3.5T to 7.5T will be displayed
Truck 7.5t - 12t - Advisory speed limits for vehicles from 7.5T to 12T will be displayed
Truck > 12t - Advisory speed limits for vehicles greater than 12T will be displayed
Select the option you require by pressing the radio button next to the vehicle type. Press
'OK' to save the setting.
WARNING: These are advisory speed limits and are subject to change.
It is the responsibility of the driver to check the road side speed limit signs and
abide by local driving regulations.
5.6.15.2 Over speed
It is possible for My Speed to alert the driver, via an audible warning, that
they have exceeded the speed limit. To set the over speed warning:
Press the
to increase or decrease the over speed warning
Press OK to save.
Return to contents
Engineered by
64 • EN
located in the
Cobra Series EN v1.106.15
Advertisement
Table of Contents
