Table of Contents
Advertisement
3.14 Re-route
Snooper can recalculate your route by avoiding certain roads or redirecting you by distance. This facility only becomes available once
you have calculated a route.
To perform a re-route:
Press the centre of the screen to enter the 'Navigate to' menu.
●
●
Press the black arrow
●
●
Press the 'Re-route' icon.
●
●
You can then choose how you would like to re-route your journey from the selections shown on the display.
In order to use this function on Snooper you will need to have entered and calculated a route.
If the 'Re-Route' icon is greyed out a route has NOT been entered.
3.14.1
Avoid By Road Name
If you know the road name or road number you wish to avoid, then select this option.
Press 'Avoid by Road Name' .
●
●
You will be provided with the turn by turn instructions of the route that you are currently following. If the road you are looking for is
not visible, press the down arrow on the right hand side of the display to see further turn by turn instructions.
Once you have found the road that you wish to avoid, select it.
●
●
The route will be recalculated and a information screen will be displayed.
●
●
The original route is shown in Red and the new route is shown in Yellow. To choose either route press the corresponding text at
●
●
the bottom of the screen, alternatively press the return arrow (bottom left) to go back to the 'Re-Route' menu.
Once you select which route you wish to use, the device will automatically start to navigate. The summary screen with simulation will
not be displayed .
Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to
provide you with turn-by-turn instructions.
3.14.2
Avoid by Range
If you wish to avoid several roads from the selected route calculated by Snooper, then this function allows you to re-calculate a route
over a user defined distance, ranging from 1 mile up to a maximum of 100 miles.
To use this function:
Press the 'Avoid by range' button - the 'Select avoided range' page will be displayed.
●
●
Select the distance of the range you wish to avoid using your finger.
●
●
If you wish to view more range distances then press the down arrow on the right hand side of the display. Once you have selected
the range you wish to avoid, Snooper will automatically re-calculate your route.
The methodology for using Avoid by Range is the same as Avoid by Road Name in section 3.1.4.1
Return to contents
once.
Engineered by
41 • EN
Cobra Series EN v1.106.15
Advertisement
Table of Contents
