Table of Contents
Advertisement
5.11 TMC (Traffic Message Channel)
This feature allows you to configure the type of TMC alerts you receive along with the facility to view the radio tuner that searches for
TMC transmissions when the TMC aerial is plugged into the TMC socket. To access this facility:
Press the centre of the screen to enter the 'Navigate to' menu.
●
●
Press the 'Configure' button.
●
●
Press the arrow
once.
●
●
Press the 'TMC' icon.
●
●
All TMC alerts are switched on by default. The screen will now show a list
of TMC alert types with a 'tick' box to the left of each type. Simply press
the tick box to select or deselect the TMC alert type. A red tick in the box
indicates that the TMC alert will appear when you access the TMC alert
box that appears on the map display, an un-ticked box will remove the TMC alert type from the TMC alert box.
To scroll through the list of TMC alerts you can press either the up or down arrows located on the right hand side of the display.
●
●
To deselect all TMC alerts from the TMC alert box un-tick the 'ALL' tick box at the top of the list of TMC alert types.
●
●
If you wish to view the radio frequency the unit is using to obtain TMC alerts you can select the 'Channel' option at the bottom.
Please note: In order to utilise this facility the TMC aerial must be plugged into the unit first BEFORE you go into the navigation
software.
At the top of the display, in the middle, a radio frequency will be displayed. If you
just see five dashes then either the unit is currently changing frequencies or the
TMC aerial is not plugged in or has not been detected.
If you wish to exit the TMC function without saving any changes press the
return arrow
located in the bottom right hand corner of the display.
Return to contents
Engineered by
68 • EN
Use the arrows
to scroll up and
down
Cobra Series EN v1.106.15
Advertisement
Table of Contents
