Table of Contents
Advertisement
To modify the information shown:
Press the centre of the screen to access the menu.
●
●
Press the 'Configure' button.
●
●
Press the
icon where you will see the list of options below.
●
●
Select the option you wish to change on the left.
●
●
To change a setting, simply press on the radio button to indicate which option you would like to choose.
●
●
Continue to select each option and select your preference.
●
●
Press 'OK' at the bottom of the screen to save your preferences.
●
●
Your chosen settings will now be saved and will appear on the screen each time you use Snooper. If you want to switch between your
Current Speed and the Atomic Clock or the Estimated Time of Arrival and Time to Destination during your journey simply touch the
screen where either piece of information is displayed and the unit will display the alternate setting and vice versa. However each time
you power the device up the original setting will be displayed.
2.2
Volume Control
The volume can be adjusted using this function within the 'Configure'
menu. To adjust the volume:
Press the centre of the screen to access the 'Menu' .
●
●
Press 'Configure'.
●
●
Press the 'Volume Control' icon.
●
●
To increase the volume press the
●
●
To decrease the volume press the
●
●
To test the volume before saving, press the 'Test' icon.
●
●
To reset the volume to the factory default press the 'Reset' icon.
●
●
Press 'OK' at the bottom of the screen to save your setting.
●
●
Note: The arrow icon in the bottom right hand corner of the display will return you to the 'Configure' menu if pressed but will
not store any changes you have made. You need to select the 'OK' button in order to save your changes.
Return to contents
icon.
icon.
Engineered by
18 • EN
use the up
and down
arrows
to scroll to
other options
Cobra Series EN v1.106.15
Advertisement
Table of Contents
