❼ Connecting Your Microphone - NEC UM352W User Manual

3. Convenient Features
❼ Connecting Your Microphone
Connecting a commercially available dynamic microphone or condenser mic to the MIC input jack allows you to output
your mic sound from the built-in speaker.
Sound input from all input terminals including APPS and USB-B will be heard from the speaker with your microphone
voice.
Select the microphone type (dynamic microphone or condenser microphone) from the menu [SETUP] → [INSTAL-
LATION] → [MIC SELECT].
Microphone sensitivity can be adjusted. From the menu, select [SETUP] → [INSTALLATION] → [MIC GAIN]. (→ page 64)
NOTE:
• Depending on input condition of HDMI1/MHL or HDMI2 signal, these is a case sound may not output.
• Do not connect an audio signal to the MIC input jack. Doing so may cause excessively loud sound, resulting in a damage to the
speaker.
Dynamic microphone or condenser microphone
38