❹ Mounting The Wireless Receiver (Sold Separately) - NEC UM352W User Manual

❹ Mounting the wireless receiver (sold separately)
For using the separately sold wireless receiver onto the projector mounted by the ceiling mount unit or the wall mount
unit, tie the wireless receiver with the projector by the supplied strap for the prevention measure from dropping down.
1. Connect the HDMI cable supplied the wireless receiver to the
projector.
• Please refer to the wireless receiver user's manual about the
cable connection.
2. Attaching the cable cover to the projector. (→ page 5)
3. Prepare the screw enclosed with the wireless receiver and the
strap enclosed with the projector.
Put the screw thread into the circle at the strap end.
4. Fasten the screw attached at the strap end to the screw setting
hole at the rear face of the wireless receiver.
5. Take the another end of strap around the projector fixing
screw on the ceiling mount or wall mount unit and then pass
the wireless receiver through the strap circle for hanging it
from the projector.
6. Store the wireless receiver connected with the projector by
the strap at the cable cover inside.
129
9. Appendix