NEC UM352W User Manual page 112

10.Drag the selected [ • ] mark to the point you wish to correct
and drop it.
• When you click somewhere within the project image area, the
nearest [ • ] mark will go to the position where the mouse cur-
sor is.
11. Repeat Step 9 and 10 to correct the distortion of the projected
image.
12. After completing, right-click the mouse.
The green frame and the mouse pointer will disappear from the
projected image area. This will complete the correction.
13.Click the "X" (close) button on the "4-point Correction" window.
The "4-point Correction" window will disappear and the 4-point
correction will take effect.
14.Click the " " button on the control window to exit the GCT.
TIP:
• After performing the 4-point correction, you can save the 4-point correction data to the projector by clicking "File" → "Export to
the projector..." on the "4-point Correction" window.
• See the Help of Image Express Utility Lite for operating "4-point Correction" window and other functions than GCT. (→ page 96,
97)
100
7. User Supportware