NEC UM352W User Manual page 107

Step 2: Connect the projector to a LAN.
Connect the projector to the LAN by following the instructions in "Connecting to a Wired LAN" (→ page 85) and "Con-
necting to a Wireless LAN (Optional: NP05LM series)" (→ page 86).
Step 3: Start Image Express Utility Lite.
1. On Windows, click "Start" → "All programs" → "NEC Projector UserSupportware" → "Image Express Utility
Lite" → "Image Express Utility Lite".
Image Express Utility Lite will start.
The select window for network connection will be displayed
2. Select Network and click "OK".
The select window for destination will show a list of connectable projectors.
• When connecting the computer directly to the projector by one-to-one, "Simple Access Point" is recommended.
• To check for the network available for connected projectors, from the menu, select [INFO.] → [WIRELESS LAN]
→ [SSID].
3. Place a check mark for projectors to be connected, and then click "Connect".
• When one or more projectors are displayed, from the menu on the projector, select [INFO.] → [WIRELESS LAN]
→ [IP ADDRESS].
When connecting with the projector is established, you can operate the control window to control the projector. (→
page 41)
NOTE:
• When [NORMAL] is selected for [STANDBY MODE] from the menu, the projector that is turned off will not be displayed in the
select window for destination
95
7. User Supportware