Sony HDR-XR100 Operating Instructions Manual page 180

ILl
o-n
(Warning indicator pertaining to
the write-protect of the "Memory Stick
PRO Duo" media)
• Access to the "Memory Stick PRO Duo" media
was restricted on another device.
~
(Warning indicator pertaining to the
flash)
Fast flashing
• There is something wrong with the flash.
"." (Warning indicator pertaining to
camera-shake warning)
• The amount of lights is not sufficient, so
camera-shake easily occurs. Use the flash.
• The camcorder is unsteady, so camera-shake
easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
E3 (Warning indicator pertaining to drop
sensor)
• The drop sensor function (p. 98) is activated,
and has detected that the camcorder has been
dropped. Therefore, the camcorder is taking
steps to protect the hard disk. Recording/
playback may be disabled as a result.
• The drop sensor function does not guarantee
the protection of the hard disk under all
possible situations. Use the camcorder under
stable conditions.
d>
(Warning indicator pertaining to
photo recording)
• The recording media is full.
• Photos cannot be recorded during processing.
Wait for a while, then record.
Grips
• You may hear a melody when some warning
indicators appear on the screen.
If
messages appear on the screen, follow the
instructions.
Recording media
g
HOD format error.
• The internal hard disk of the camcorder
is set differently from the default format.
Performing [MEDIA FORMAT] (p. 71) may
enable you to use your camcorder. This will
delete all data in the internal hard disk.
Data error.
• An error occurred during reading or writing
the internal hard disk of the camcorder. This
may occur when you keep applying shock on
the camcorder.
• If the message is preceded by a GPS indicator,
there may be some trouble with the GPS
receiver. Turn on your camcorder again.
(HDR-XR200V)
The Image Database File is damaged. Do
you want to create a new file?
HD movie management information is
damaged. Create new information?
• The image management file is damaged. When
you touch [YES], a new image management
file is created. The old recorded images on the
media cannot be played back (Image files are
not damaged). If you execute [REPAIR IMG.
DB E] after creating new information, playing
back the old recorded images may become
possible. If it does not work, copy the image
using the supplied software.
Inconsistencies found in Image Database
File. Do you want to repair the Image
Database File?
The Image Database File is damaged. Do
you want to repair the Image Database
File?
Inconsistencies found in Image Database
File. Cannot record or play HD movies. Do
you want to repair the Image Database
114