Sony HDR-XR100 Operating Instructions Manual page 120

t.l;;;;;;;;;;;;;;;;;;;;;::J
1lII>-=I1==(JJ!J~' ~~~~
HDMI
cable
/I)}j¥
Turn on your camcorder.
The TV input is switched automatically, and the image of your camcorder is displayed
on the TV.
Connect your camcorder and a
liB
RAVIA" Sync compatible TV with the HDMI
cable (sold separately).
You can operate your camcorder with the Remote Commander of your TV by connecting
your camcorder to a "BRAVIA" Sync compatible TV launched in
2008
or later with the HDMI
cable.
0Tips
• If you connect your camcorder to the TV using more than one type of cable to output images, the order
of priority of the TV input jacks is as follows:
HDMI -. component -. S VIDEO -. video
• HDMI (High-Definition Multimedia Interface) is an interface to send both video/audio signals. The
HDMI OUT jack outputs high quality images and digital audio.
When connecting to yourTV via a VCR
Connect your camcorder to the LINE IN input on the VCR using the A/V connecting cable.
Set the input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.).
When yourTV is monaural (When yourTV has only one audio input jack)
Connect the yellow plug of the A/V connecting cable to the video input jack and connect the
white (left channel) or red (right channel) plug to the audio input jack of your TV or VCR.
<D
Notes
• When the
AN
connecting cable is used to output images, images are output with standard definition
image quality (SD).
54