Sony HDR-XR100 Operating Instructions Manual page 176

The screen image is bright, and the
subject does not appear on the screen
(HDR-XR200/XR200V).
• Press NIGHTSHOT (p. 36).
The screen image is dark, and the subject
does not appear on the screen.
• Press and hold DISP down for a few seconds
to turn on the backlight (p. 38).
Horizontal stripes appear on the images.
• This occurs when recording images under a
fluorescent lamp, sodium lamp, or mercury
lamp. This is not a malfunction.
Black bands appear when you record a TV
screen or computer screen.
• Set [ItlSTEADYSHOT] to [OFF] (p. 76)
(HDR-XR100/XRlOl).
[LCD BL LEVEL] cannot be adjusted.
• You cannot adjust [LCD BL LEVEL] when:
- The LCD panel is closed on your camcorder
with the LCD screen facing out.
- The power is supplied from the AC Adaptor.
Sound is not recorded correctly (HDR-
XR200/XR200V).
• If you disconnect an external microphone, etc.
during recording movies, sound may not be
recorded correctly.
• Connect the microphone again in the same
way as when you start recording movies.
Images cannot be played back.
• Select the recording media you want to
play back by touching
A
(HOME) --+
"b
(MANAGE MEDIA) --+ [MOVIE MEDIA
SET)/[PHOTO MEDIA SET] (p. 69).
• Select the image quality of a movie you want
to play back by touching
A
(HOME) --+
ill
(SETTINGS) --+ [VIEW IMAGES SET) --+
[m/mSET) (p. 86).
Photos cannot be played back.
• Photos cannot be played back if you have
modified files or folders, or have edited the
data on a computer. (The file name flashes in
that case.) This is not a malfunction.
• Photos recorded on other devices may not be
played back. This is not a malfunction.
[1]
is indicated on an image on the
VISUAL INDEX screen.
• This may appear on an image recorded on
other devices, edited on a computer, etc.
• You removed the AC Adaptor or the battery
pack before the ACCESS/access lamp is turned
off after recording. This may damage your
image data and
rn
is displayed.
~
is indicated on an image on the
VISUAL INDEX screen.
• The image data base file may be damaged.
Check the data base file by touching
A
(HOME) --+
"b
(MANAGE MEDIA) --+
[REPAIR IMG.DB E)--+ the recording
medium. If it still appears, delete the image
with
121
(p. 56).
No sound or only a quiet sound is heard
during playback.
• Turn up the volume (p. 42).
• Sound is not output when the LCD screen is
closed. Open the LCD screen.
• When you record sound with [MICREF
LEVEL) (p. 105) set to [LOW), the recorded
sound may be difficult to hear.
• Sounds cannot be recorded while shooting
an about-3-second movie using [SMTH SLW
REC].
Left and right sound will be heard
unbalanced when playing back movies on
computers or other devices.
• This happens when sound recorded in 5.1ch
surround is converted to 2ch (normal stereo
sound) by a computer or other device. This is
not a malfunction.
110