Sony HDR-XR100 Operating Instructions Manual page 133

<D
Notes
• Connect your camcorder to the wall outlet
(wall socket) using the supplied AC Adaptor for
this operation (p. 19).
• High definition image quality (HD) movies
will be dubbed with standard definition image
quality (SD).
II]
AN connecting cable (supplied)
Connect the A/V connecting cable to the
input jack of another device.
[2J
AN connecting cable with 5 VIDEO
(sold separately)
When connecting to another device
via the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO cable
(sold separately), higher quality images can
be produced than with an A/V connecting
cable. Connect the white and red plug
(left/right audio) and the S VIDEO plug
(5 VIDEO channel) of the A/V connecting
cable with an S VIDEO cable. If you
connect the S VIDEO plug only, you will
hear no sound. The yellow plug (video)
connection is not necessary.
67
AN Remote Connector
Input
SVIDEO
~
0
~
[1}-!
VIDEO
<I:)
E-ill
(Yellow)
(White)
, .
I~
AUDIu
L.
(Red)
(Yellow)
~
Signal flow
1:1
Insert the recording media in the
recording device.
• If your recording device has an input
selector, set it to the input mode.
fJ
Connect your camcorder to the
recording device (a disc recorder,
etc.) with the AN connecting
cable
II]
(supplied) or an AN
connecting cable with SVIDEO
[Z]
(sold separately).
• Connect your camcorder to the input jacks
of the recording device.
1£1
Start playback on your
camcorder, and record it on the
recording device.