Ethernet Connection With External Power Brick; Power Supply - VeriFone Vx810 Reference Manual

S
ETUP

Power Supply

Ethernet
Connection with
External Power
Brick
Power Supply
CAUTION
WARNING
NOTE
32
V X 810 R G
EFERENCE
This cable option has a junction box that provides a standard RJ-45 LAN socket
and a DC jack. However, since most hosts do not support peer-to-peer LAN
connection to a PIN pad, an additional RJ-45 socket is provided on the junction
box to allow a direct connection between V
Figure 21

Ethernet Connection with External Power Brick

x
Not all V 810 configurations and device contexts require use of a power supply.
However, VeriFone ships power supplies with those that require them.
If you have changed the context in which the V
about whether a power supply should be used, contact your VeriFone
representative.
Using an incorrectly rated power supply can damage the device or cause it not to
work properly.
Before connecting a power supply, disconnect the power pack cord from the
power outlet.
x
Make all V 810 and device ECR or PC connections before connecting the power
pack cord into a wall outlet or surge protector.
Do not plug the power pack into an outdoor outlet or operate the device outdoors.
Also, disconnecting power during a transaction can cause transaction data files
not yet stored in memory to be lost.
To protect against possible damage caused by lightning strikes and electrical
surges, VeriFone recommends installing a power surge protector.
x
When the V 810 has power and an application is loaded, the application starts
after the initial VeriFone copyright screen and displays a unique copyright screen.
If no application is loaded,
initial VeriFone copyright screen.
UIDE
x
810 and the host.
x
810 must work or have questions
appears on the display after the
DOWNLOAD NEEDED