Height Adjustment Of Af Coupling Shaft /Height Adjustment Of Aperture Lever - Nikon D3 VBA18001 Repair Manual

Height adjustment of AF coupling shaft
1.7±0.2mm
Bayonet face
#351
Height adjustment of Aperture lever
△ (Addition)
1. Lower ① part for charging.
2. Push ② all the way to end toward the mount-side.
3.Measure the height of the aperture lever by using the
tool (J18004).
+0.1
Standard: 3.4 mm
-0.05
In case the value is out of standard, make the adjustment
by turning the adjustable
Changed page △× 2
Lens release pin
Lens release pin
AFTER
Screw #1597 adjustment, apply
Adhesive: Screwlock
screw.
②
- Ａ  ･
① Set the AF mode lever (#383) to
After pressing the lens release button a few
times, measure the height of the AF coupling
ring shaft (#351).
② Adjust the height of the AF coupling ring shaft
by the screw (#1597).
③ When the height of the lens release pin becomes
0.4mm, check if the AF coupling ring shaft does
NOT protrude from the bayonet face.
④ After the adjustment, fix the screw (#1597) with
the screwlock.
△ (Revision)
Adjustable screw
I base-plate unit #B10071
-
logo Q0440 forGraphic
070518 Gdesign ito
INC
VBA18001-R.3719.A
S
" " .
①
サービス
計画課
Ｍ
Dec.28.2007