Height.adjustment.of.aperture.lever; Mg.pcb.unit - Nikon D3100 VBA28001 Repair Manual

Height.adjustment.of.aperture.lever

• Refer.to."Height.adjustment.of.aperture.lever".of.ADJUSTMENT.Separate.Volume.①.for.details.
Standard:.3.3.-.3.6.mm

MG.PCB.unit

• Turn.the.gear.(indicated.in.red).of.the.SQ.PCB.unit.in.the.direction.of.the.arrow.to.raise.the.mirror...
Then,.set.the.lever's.position.of.the.MG.PCB.unit.to.the."OK".position.as.below.
Caution:.It.may.require.turning.the.gear.several.times.to.become.at."OK".position.
User ID:INC
J18004
Aperture.lever.positioning.gauge
SQ.PCB.unit
NG:.Not.Good
Tool.(device)
- A8 ・ D3100 -
VBA28001-R.3813.A
lever's
OK
NG:.Not.Good