Nikon D3 VBA18001 Repair Manual page 13

Image sensor unit
#525×3
Caution:
Some bodies have already washer(s) attached
on the mounting surface of the image sensor
unit (#B20521).
Top cover section
・Remove the cover (#1130), screw
(#1568), and diopter adjustment knob
(#1121).
・Take out each screw (#1543, #1538,
#1519, #1510) and two screws (#1518).
・Take out the two screws (#1137) and
remove eyepiece block unit (#B1137).
・Disconnect the top cover FPC from the
connector.
・Remove the top cover section.
#B20521
#1137×2
Eyepiece block unit (#B1137)
#1121
#1568
#1130
#1543
Top cover FPC
- Ｄ  ･
#1538
-
logo Q0440 forGraphic
070518 Gdesign ito
INC
VBA18001-R.3719.A
Dust-prevent spacer
#1519
#1510
#1518×2