Af Sensor Unit - Nikon D3 VBA18001 Repair Manual

AF sensor unit

・Mount the AF sensor base plate (#B10297).
・Tighten one screw (#303) and three screws (#1526).
・Attach the spring (#304).
・Put two springs (#296) and one spring (#293) to surround each post.
・Mount the AF sensor unit (#B3004).
・Put two washers (#300).
・Turn two screws (#295) lightly all the way to the end, then give them three turns counterclockwise.
・Put the washer (#294).
・Put the E ring (#298).
・Attach the plate (#283).
・Tighten the screw (#1588).
△ (Revision) Front body FPC
・Connect the TTL FPC to the connector.
・Attach the plate (#282).
・Tighten the screw (#1588).
・Attach the mold (#281).
・Tighten the screw (#1532).
A
#1526×3
#296×2
#304 spring
hooking position
#303
△ (Revision) Front body FPC
TTL FPC
Changed page △× 2
#281
#B10297
#303
#293
#294
#298
#304
#B3004
#300×2
#295×2 #1588×2
- Ａ 10 ･
logo Q0440 forGraphic
#1532
A
#282
#284
-
070518 Gdesign ito
INC
VBA18001-R.3719.A
#283
サービス
計画課
Ｍ
Dec.28.2007