Ptz Camera Control Panel And Recording Buttons - Leadtek WinFast Guard Pro User Manual

2. Camera buttons
3. Loop button

PTZ Camera Control Panel and Recording Buttons

If the selected remote camera is a PTZ (Pan/Tilt/Zoom) camera, you can use
the PTZ Camera Control Panel to adjust the angle of the camera. Use the
buttons beneath this panel to start/stop video recording.
1. Zoom control
2. Record button
3. Stop button
Click a camera button to select the corresponding
remote camera. You need to select a remote camera
first before you can initiate video recording or control
the camera if it is a PTZ camera.
Click this button to display each four-set cameras on
a continuous loop, and click it again to disable the
loop display.
1
2
3
Click the up arrow to zoom in, or the down arrow to
zoom out. Or, click the circle button to go back to the
default zoom ratio. If the PTZ camera does not
provide zoom scaling feature, click the up arrow
continuously to keep zooming in, or click the down
arrow continuously to keep zooming out.
Click this button to start recording video from the
selected camera.
Click this button to stop recording.
REMOTE VIEWER
REMOTE VIEWER
4
5
REMO
REMO
73