Table of Contents
Advertisement
Map button
Click the
Map
button to switch Guard Console to Map mode. This mode
shows a graphical layout of the site being monitored, with clear indications on
where the video cameras, sensors, and/or alarms are installed. (See
"Monitoring a Site in Map Mode" on page 15 for details.)
Channel Selection Panel
By default, Video Camera buttons are displayed at the bottom of the
Console
program window. These buttons allow you to display a split screen in
single view.
If there are input/output devices such as sensors and alarms also connected,
you can easily switch between viewing video cameras and monitoring the
input/output devices.
Camera Panel
This panel provides camera buttons that are numbered in sequence and a
Switcher button.
To monitor a video
camera, click its
camera number. The
screen then changes
into single view,
displaying live video
from the selected
camera.
Input/Output Device Panel
Input/Output Device Panel displays light indicators that show whether the
input/output devices are connected to the Site Server.
The top row of light indicators show the connection status
of input devices such as sensors. A green light indicates
that the device is connected. A red light indicates that the
device is transmitting signal to Guard Console.
The bottom row of light indicators show the connection
status of output devices such as alarms. A green light
indicates that the device is connected. A red light indicates
that Guard Console is transmitting signal to the device.
GUARD CONSOLE
GUARD CONSOLE
Click the Switcher
button to change to
the Input/Output
Device Panel.
Click the Switcher
button to change to
the Camera Panel.
GUARD
GUARD
Guard
7
Advertisement
Table of Contents
