Leadtek WinFast Guard Pro User Manual page 33

NSOLE GUARD CONSOLE
NSOLE GUARD CONSOLE
1. Com port
2. Content
3. Add
4. Delete
5. Modify
Flash message at local site
An "Event" indicator will be displayed if and only if the "
site
indicator will be displayed on the bottom right corner of a split screen on Site
Server when an event is detected.
Flash message at remote site
Displays an "Event" indicator on the Remote Viewer interface of users who are
remotely viewing your video cameras from a Web browser. A blinking "Event"
indicator will be displayed on the top, central portion of a split screen on the
Remote Viewer when an event is detected.
Change to single view and delay for ___ seconds
Switches the Guard Console screen to single view to display live the camera
from which an event has been detected. Specify the duration (in number of
seconds) for retaining the display in single view before changing Site Server
back to split-screen view.
Alarm
Plays an alarm sound. From the drop-down list, select from the available sounds,
or select "
listen to a preview of your recorded sound, click
"
Loop
Note: Each camera can have its own customized alarm sound.
28
" checkbox is selected in the
Custom " and then click
" option to sound the alarm until the event terminates.
Select an available Com port that connects to
a modem device.
Type the message to be sent.
Click this button to add a new pager number.
Click this button to remove the selected pager
number from the pager number list.
To modify a pager number, first select that
number in the pager number list, then make
the changes in the edit box at the bottom.
Click the Modify button to update the pager
number.
Notification dialog box
Record to record your own alarm sound. To
Play
Flash message at local
. A blinking "Event"
. You can also select the