Leadtek WinFast Guard Pro User Manual page 17

NSOLE GUARD CONSOLE
NSOLE GUARD CONSOLE
These are sensor icons.
Drag them onto the map,
and drop each of them
to the installed location
of each sensor.
Click this button
to switch to output
device icons.
Drag the output device icons
onto the map, and drop each of
them to the installed location of
each device.
While you are adding camera icons onto the map, you may notice that their
colors vary. Camera icons may appear in one of these three colors:
12
In gray color, indicates that there is no video camera connected.
In light blue color, indicates that there is a video camera connected
but the corresponding camera icon has not yet been plotted on the
site map.
In dark blue color, indicates that there is a video camera connected
and the corresponding camera icon has already been plotted on the
site map.
Click this button
to load the
map's image file
(in BMP format).
Type in a name
for the map.
These are camera icons. Drag them
onto the map, and drop each of them to
the installed location of each camera.
Click this button to
switch to sensor icons.
When you are done
positioning icons, click this
button to return to Map mode.