Table of Contents
Advertisement
Memory buttons
When you need to select different video cameras per time segment, it could
be tedious to keep on selecting and deselecting the
Camera Selection Panel
deselecting cameras, Record Viewer provides three
can be used to store three different combinations of camera selections.
To store a combination of camera selections to a Memory button:
1. Select the desired cameras (or deselect unwanted cameras) by clicking
the
Camera buttons
2. Click and hold your mouse over a Memory button for 2 seconds. The
Memory button
Release your mouse button when you see the
more quickly.
3. Repeat the above steps to store other combinations of camera selections
to the other
Memory buttons
Next time you click on the Memory buttons, Camera buttons will automatically
be selected according to the stored combinations.
Viewing records by events
To search for video recorded events, select any of these three options from
the "Record type" drop-down list:
!
Event records
When selected, the program searches for all events that
were recorded on a specified date and displays them in
the
History list
.
The
History list
events: motion events, sensor events, and manually
triggered events. The list shows the actual time of
recording, the camera device that recorded the event, and
the type of event. The type of event is indicated as follows:
(Mo)
(S"n")
(Ma)
. To save you the trouble of reselecting and
on the
Camera Selection Panel
flashes slowly as it stores your camera selections.
.
displays these 3 types of recorded
Motion event
Sensor event, where "n" represents the sensor number
Manually triggered event
RECORD VIEWER
RECORD VIEWER
Camera buttons
Memory buttons
.
Memory button
RECOR
RECOR
on the
that
flashes
47
Advertisement
Table of Contents
