Using Remote Viewer Through Direct Modem Connection - Leadtek WinFast Guard Pro User Manual

EWER REMOTE VIEWER
EWER REMOTE VIEWER
1. Enter a valid user ID and password.
2. If the remote DVR Guard Console does not enable the access control,
select "Guest login" check box.
3. Select "Internet connection" option for remote viewing through Internet.
4. Enter the IP address of remote DVR Guard Console (Accept domain name
also).
5. Select the Internet bandwidth type of local machine.
6. You can select a historical connection to fill out the connection information
automatically.
7. Click on "OK" button to start the connection.
Note: 1. Before using Remote Viewer through Internet connection, be sure that the
remote DVR Guard Console has the option "Allow remote access" selected
on the General page of Preference dialog box, and the DVR machine has
been assigned a unique IP address. Your client machine runs Remote Viewer
should connect to Internet also.
2. Web browser needs Microsoft Internet Explorer version 5.5 or later versions.
Using Remote Viewer through direct modem
connection
Remote Viewer supports single screen, four split screens and sixteen split
screens for Internet connection. To invoke four split screens Remote Viewer,
click on the appropriate command in the [Start - Programs - WinFast Guard
Pro Remote Viewer - Four Split Screens] submenu. You will then see a Web
browser open a four split screens web page as well as button controls. Click
on the button
valid user ID and password, and the IP address of remote DVR Guard
Console, you will see four split screens showing live video from the remote
DVR Guard Console.
58
to prompt you to enter login information. After entering a
DVR Guard Console