Leadtek WinFast Guard Pro User Manual page 41

NSOLE GUARD CONSOLE
NSOLE GUARD CONSOLE
3. Name
4. Type
5. Gain
6. Interval
7. From/To
8. Test
36
Specify the sensor name (for instance, the
location where the sensor is installed).
Select an output type: NC (Normal Close) or
NO (Normal Open).
Specify the output voltage.
Specify the interval for sending the specified
output voltage to the device.
Specify the valid time period for activating the
output device.
Click this button to output the specified voltage
to NO-type devices and output 0 voltage to
NC-type devices during the specified interval.