Table of Contents
Advertisement
1
2
4. Time delay for
switching cameras
Input/Output device settings (Device tab)
Click the
Device
tab in the Preferences dialog box to select an I/O card and
set up the connections to security devices such as sensors and alarms. Under
the
Device
tab, click the "Input" tab to configure sensor devices, and click the
"
Output
" tab to enable devices to receive signals from Guard Console.
Configuring input devices (Input tab)
In the "
Input
" tab, at most 16 sensor devices can be enabled and customized.
The following describes the settings that can be customized.
GUARD CONSOLE
GUARD CONSOLE
4
Per split screen, specify the time duration for
displaying each of the assigned video
cameras. The duration can be set from 5
seconds up to 360 seconds.
GUARD
GUARD
3
33
Advertisement
Table of Contents
