Timer For Preconditioning - Volvo XC 90 Owner's Manual

CLIMATE CONTROL
||
NOTE
The car's doors and windows should be
closed during the preconditioning of the pas-
senger compartment.
WARNING
Do not use preconditioning if the car is equip-
ped with a heater*:
•
In unventilated spaces indoors. Exhaust
gases are emitted if the heater starts.
•
In locations with combustible or flamma-
ble material nearby. Fuel, gas, long grass,
sawdust, etc. may ignite.
•
When there is a risk that the heater's
exhaust line may be blocked. For exam-
ple, deep snow inside the front right-hand
wheel housing can obstruct the heater's
ventilation.
Remember that the preconditioning can be
started by a timer that has been set for a long
time in advance.
Starting from a mobile phone*
Start of preconditioning and information about
the selected settings can be managed from a
mobile phone that has the Volvo On Call* mobile
app. The preconditioning warms the passenger
Certain car models and markets.
4
194
compartment to the comfort temperature or cools
it to the current outer temperature.
To be able to also cool the passenger compart-
ment to the comfort temperature (with the car's
air conditioning) the Engine Remote Start - ERS
via Volvo On Call* mobile app. can be used.
Related information
•
Parking climate* (p. 192)
•
Timer for preconditioning* (p. 194)
•
Starting/switching off climate comfort reten-
tion* (p. 197)
•
Symbols and messages for parking climate
control* (p. 198)
•
Heater* (p. 199)

Timer for preconditioning*

The timer can be set so that the preconditioning
is finished at a predetermined time.
The timer can handle up to 8 different settings
4
for:
•
A time on a single date
•
A time on one or more days of the week, with
or without repetition.
Related information
•
Parking climate* (p. 192)
•
Setting the timer for preconditioning*
(p. 195)
•
Activating/deactivating the timer for precon-
ditioning* (p. 196)
•
Starting/stopping preconditioning* (p. 193)
•
Symbols and messages for parking climate
control* (p. 198)
* Option/accessory, for more information, see Introduction.