Volvo XC 90 Owner's Manual page 217

Usage
There are two extended positions for the cargo
cover - a full-cover position and a work position,
where it is partially extended to make it easier to
reach further into the cargo area.
Full-cover position
If 7-seat car - hang the locking tabs of the
seatbelts for the third seat row from the des-
ignated hooks in the side panels. If 5-seat
car - see the next point.
From retracted position - grip the handle and
pull out the cover so it slides over the side
panels in the cargo area - pull to the end
position.
When the cargo cover is extended so that it
covers the cargo area - guide the cover's
attachment pins into the grooves in the side
panels and release, while at the same time
angling the handle with a light downward
pressure.
> The cargo cover is locked in the full-cover
position.
Work position
From retracted position - grip the handle and
pull out the cover so it slides over the side
panels in the cargo area - pull to the end
position and guide the cargo cover's attach-
ment pins into the grooves in the side panels.
(If the cover is already in the full-cover posi-
tion - see the next point).
From full-cover position - grip the handle and
guide the cargo cover's attachment pins into
the grooves in the side panels and release.
> Retract the cover until it stops in the work
position.
LOADING AND STORAGE
In the event that your hands are occupied:
In the extended full-cover position - lightly
push the handle part of the cargo cover
upward, e.g. with an elbow.
>
The cover retracts until it stops in the
work position.
To return to full-cover position from work posi-
tion:
1. Grip the handle and pull the cargo cover out
to the end position.
2. Release slightly and angle the handle by
means of a light downward pressure.
> The cover is then locked in the end posi-
tion.
IMPORTANT
Avoid loading objects on top of the cargo
cover in extended position.
}}
215