Rs-232 Port; Logic Modules; Audible Alarm; Port - Liebert POWER PROTECTION STATIC TRANSFER SWITCH User Manual

Liebert power protection static transfer switch 2 user manual

Table of Contents

9.2.4

The logic contains three separate redundant logic modules. The modules contain the logic necessary

to run the STS2 and control transfers and shunt trips under all circumstances, without any outside

assistance once set-up and started properly.

9.2.5

An audible alarm is installed on the control board. This alarm is triggered by an alarm condition

detected on the unit. The alarm can be turned off from the touch screen (Color Graphical Display

units) or by a push button (LED Display units). Turning off the audible alarm does not clear or reset

the condition that triggered the alarm.

9.2.6

RS-232 Port

An RS-232 serial port is provided to allow an external terminal to be connected as another user inter-

face. See 12.1 - Using the RS-232 Port on page 76 for more information on using the RS-232 port.

Theory of Operation

Table of Contents

Do you have a question about the POWER PROTECTION STATIC TRANSFER SWITCH and is the answer not in the manual?