Figure 56 Comm Options Dialog Box - Liebert POWER PROTECTION STATIC TRANSFER SWITCH User Manual

System Settings
The System Settings choice under the Config menu displays another pop-up menu with three choices:
• Comm Options
• System Options
• System ID
To access the System Settings menu:
1. Select CONFIG from the menu bar.
2. Select SYSTEM SETTINGS from the Config menu.
Comm Options
The Comm Options dialog box allows you to configure the communications settings for the STS2.
• Select COMM OPTIONS from the System Settings Menu.
The Comm Options dialog box is displayed. See Figure 56.
• An option can be enabled by selecting YES.
• An option can be disabled by selecting NO.
• An option can be configured by selecting the adjacent option button to display a separate con-
figuration dialog box.
The instructions for configuring the communications options are provided in this section.

Figure 56 Comm options dialog box

Option
buttons
93
STS2 Touch Screen Display