Usb Hs Test Mode - Lexmark X46x series Service Manual

USB HS Test Mode

1. Select USB HS Test Mode from HARDWARE TESTS.
2. Press until the
3. Select the desired Test, and then press
Port Test
Port 0 Test J
Test K
Test SEO NAK
Test Packet
Test Force Enabled
Port 1 Test J
Test K
Test SEO NAK
Test Packet
Test Force Enabled
Port 2 Test J
Test K
Test SEO NAK
Test Packet
Test Force Enabled
Port 3 Test J
Test K
Test SEO NAK
Test Packet
Test Force Enabled
To stop testing before completion, turn the printer off.
appears next to the Port to be tested, and then press
.
Appears on the display
Certification Testing...
Certification Testing...
Certification Testing...
Certification Testing...
USB High Speed
USB High Speed
USB High Speed
USB High Speed
7014-xxx
.
3-23
Diagnostic aids