Installation Steps; Package Contents; Recommended Accessories - Axis YP3040 Installation Manual

YP3040 Installation Guide
YP3040 Installation Guide
This installation guide provides instructions for installing the YP3040 Pan-Tilt Motor.

Installation steps

1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware.
• Install the wall bracket, see page 5.
• Install the Pan-Tilt motor, see page 5.
• Install the camera in the housing, see page 5.
• Install the housing on the Pan-Tilt motor, see page 5.
• Connect the cables, see page 6.
4. Setup, see page 7.

Package contents

Item
Pan-tilt motor
Mounting kit
Printed materials
Optional accessories

Recommended accessories

Item
Wall bracket
Mains adaptor
Housing
Network cameras
Models/variants/notes
YP3040
2 screws M5x10 for mounting the camera housing on the splint
4 bolts for mounting the pan-tilt motor on the recommended wall bracket
1 allen key
YP3040 Installation Guide (this document)
Drill template (with YP3040 Wall Bracket)
Axis Warranty Document
See www.axis.com for information on product documentation, installation tools,
cameras, power accessories, and housings
Models/variants/notes
YP3040 Wall Bracket for YP3040 Pan-Tilt Motor
AXIS PS24 Mains Adaptor, power supply input 100—230 V AC, suitable for indoor
and outdoor use
AXIS T92A20 Housing to be mounted on YP3040 Pan-Tilt Motor
AXIS P13-E series
AXIS Q1755-E
AXIS Q1910-E
Important!
This product must be used in
compliance with local laws and
regulations.
Page 3