Axis T92A00 Installation Guide; Axis T92A00 Housing; Package Contents - Axis T92A00 Installation Manual

Page 4

Package contents

1
3 rectangular spacers
Bag 1:
2 small cable glands
1 large cable gland
1 allen key
1 large hexagonal screw nut
Bag 2:
2 small hexagonal screw nuts
2 hex head cap screws
2 Phillips screws
2 washers
1 clear plastic spacer
1 large black washer
Bag 3
2 small black washers
3 flathead screws
AXIS T92A00
1 AXIS T92A00 Power supply
1 cable (red/black)
Axis Network Camera*
AXIS P1311, AXIS Q1755, AXIS 210/ 210A, AXIS 211/211A/211M/211W, AXIS 221, AXIS 223M
Printed installation guide
Bracket, cables and connector (not included)
1 wall bracket*
1 mains power cable
1 network cable
1 RJ45 connector
Tools (not included)
1 Phillips screw driver
1 flathead screw driver
1 small (2mm) flathead screw driver
1 RJ45 crimp tool
* Sold separately or included in kit, see Accessories product list at www.axis.com for details
(3 different lengths)
Note that the AXIS T92A00 Power supply is pre-installed.
Note that the cable is pre-installed.
Instructions on how to install the camera on the network
See www.axis.com for available brackets and accessories.
100-240V AC power cable
Shielded Twisted Pair (STP) cable recommended.
If using a bracket with an external cable channel, the RJ45
connector is attached after the cable has been pulled through
the cable gland
See note on RJ 45 connector above

AXIS T92A00 Installation Guide