Turn On/Off; Setting The Balance To Zero - KERN HFB-BA-e-1212 Operating Instructions Manual

5.3

Turn on/off

Start-up
 Press the ON/OFF button on the balance keyboard. The display lights up and the
balance carries out a selftest. The selftest is completed when the weight value 0
appears on the display.
Switch on only possible at the keyboard of the balance.
Switching Off
 Press the ON/OFF button on the balance keyboard.
5.4

Setting the balance to zero

In order to obtain optimal weighing results, reset to zero the balance before weighing.
Further adjustments are possible in the menu, see chapter 6.
Manual
 Unload the balance
 Press the ZERO button, the balance begins to reset to zero.
The [] symbol over a appears.
Automatic
In the menu can be changed the amount of the automatic zero point correction,
see chap. 6 / Function „F3 a2n".
20 HFB-BA-e-1212