Elation TVL2000 User Instructions page 6

TVL2000
intensity to create your desired color temperature.
1. Press the MENU button until "MANU" is displayed, press
ENTER. "LED1", "LED2" or "DINN" will be displayed. LED 1 is
warm white, LED 2 is cool white, and DIMM is the master
dimmer for this mode.
2. Use the UP or DOWN buttons to scroll to the color you
would like adjust first, and press ENTER.
3. Use the UP or DOWN buttons to adjust the intensity of the
chosen color, and press ENTER after the adjustment.
4. Continue to make adjustments to the two colors until your
desired color is reached. Once your desired color is reached do
not leave this mode.
5. To leave this mode, press the MENU button. Once you leave
this mode, all settings will be reset.
BLND -
Blackout or Stand by mode.
1. Press the MENU button until "BLND" is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout press the UP or DOWN buttons until Yes
is displayed, press ENTER to confim and exit. The fixture will
now be in Blackout mode. To deactivate Blackout mode, select
No and press Enter.
LED -
With this function you can have the LED display
turn off after 20 seconds.
1. Press the MENU button until "LED" is displayed, press
ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to keep the LED display On at all
times, or "OFF" so that the LED display turns off after 20 sec-
onds.
©Elation Pr fessionals® - www.elationlighting.com - TVL2000 Instruction Manual Page 11
o
System Menu TVL2000
3. Press ENTER to confirm.
DISP -
1. Press the MENU button until "DISP" is displayed, press
ENTER.
2. Press the UP button to select "DISP" to activate this function,
or "DSIP" to deactivate this function.
3. Press ENTER to confirm.
TEST
1. Tap the MENU button until "TEST" is displayed, press ENTER.
2. The fixture will now run a self test program. To stop the self
test press either the MENU or ENTER button.
FHRS
of the unit.
1. Press the MENU button until "FHRS" is displayed, press
ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER
the unit.
1. Press the MENU button until "VER" is displayed, press
ENTER.
2. The display will show the software version.
©Elation Pr
This function will reverse the display 180º.
- This function will run a self test program.
- With this function you can display the running time
- Use this function to display the Software version of
fessionals® - www.elationlighting.com - TVL2000 Instruction Manual Page 12
o
System Menu