Related Manuals for Boyo VTR113
Summary of Contents for Boyo VTR113
- Page 1 VTR113 Vehicle Camera Recorder USER’S GUIDE Caution: Always practice safe driving. Do not operate the VTR113 while driving.
-
Page 2: Initial Setup
Initial setup Please insert the MicroSD card into the VTR113 vehicle camera recorder card slot. It is recommended to format the card before the initial use. (To format MicroSD card, go to setup, Format and choose yes for format MicroSD card) - Page 3 Description Buttons During Live During Camera During Preview During Play During Menu Mode Mode Mode Mode Mode 1. [POWER] ON / Off Press once to Press once from Switch between (Hold the button switch to camera camera mode to Setup menu and approximately mode Play back mode...
-
Page 4: How To Mount
Powering Method There are two ways to power the VTR113. You can power the DVR using the cigarette plug or the OBDII connector if the vehicle is equipped. Power using OBDII connector A. -
Page 5: Device Operation
VTR113 may have sleep mode when the vehicle is on parking mode. But, when you have accident while in sleep mode, you will still have 1 minute of recording even VTR113 is on sleep mode. And also, you can always edit parking monitor mode and Parking Record Time setup from Video menu. - Page 6 DVR Mode Types Live Recording Mode When the vehicle is turned on, the VTR113 will automatically turn on and start to record. Solid red dot will blink indicating that the unit is recording. The red timer on the top right corner shows the record- ing duration.
-
Page 7: Photo Mode
Photo Mode Resolution Setting for Photo Mode During Photo Mode, press and hold down [ENTER] button for 3 seconds. Highlight Resolution and press [ENTER] button Use the [UP] and [Down] arrow buttons to navigate to the desired setting. Then press [ENTER]. To exit the menu screen, hold down [ENTER] button for 3 seconds. - Page 8 Playback/Delete/Protect Mode From Stanby mode, press power button twice to cycle to Playback Mode. Please press up or down buttons to browse through the video and photo files. To play the video file, press [EN- TER] to start and stop playing the video. Delete video and photo files Note: This method will not delete locked files.
-
Page 9: Locking And Unlocking Files
Locking and unlocking files Note: Locking means the same as protecting. The locked files will not be overwritten or deleted automatically. Locked files can only be deleted manu- ally or by reformatting the storage card. Reformatting will wipe the entire storage card clean. - Page 10 A. Off Loop recording time: VTR113 records and saves video files in segments. Once the card is full, it will overwrite old files and continue to record. A. 2 min (Saves video files in 2 minute segments and loop over...
- Page 11 Parking Setting: This feature only applies with the use of OBDII connector. Parking setting mode alllows recording while the car is turned off. When it senses impact, the VTR113 will turn on automatically and start to record thereafter. A. Off (Disable impact sensing) Low (Low sensitivity) *Triggered by heavy impact.
-
Page 12: Setup Menu
Setup Menu To get to the Setup settings, press and hold down the [ENTER] button for 3 sec- onds while in Standby Mode, then press [POWER] button to switch between Video Settings and Setup Menu. Language: Change the language of the OSD A. -
Page 13: Technical Specifications
A. 10 sec 30 sec 60 sec D. On (Always on) Sound Effect: Button sound effect A. Off Format: Formatting will delete entire data in the storage card including protected files. A. Yes (Format the card. Cannot retrieve or undo) No (Cancel) Default Setting: Restores back to factory default settings. - Page 14 Vision Tech America, Inc. www.visiontechamerica.com For technical support, call 888-941-3060 Email: info@visiontechamerica.com...