Boyo VTK380HD User Manual

1. BILL OF MATERIAL
Camera Manual
2. SPECIFICATION
• High sensitive 1/4" HD Color CMOS Sensor
(1089)
• Reverse/ Non-reverse image selectable
• Parking guide line on/off selectable
• Waterproof (IP67)
• 170° wide viewing angle
• Super sensitive low Lux performance
• 12VDC (Tolerance 9V ~ 16V)
• Chipset 1089 HD
• Pixel: NTSC/PAL 800x533
• 0.05 Lux
3. WIRING
To monitor
Ground 12VDC Rear Lamp
To monitor
Ground 12VDC Rear Lamp
For technical support contact 888-941-3060 or email info@visiontechamerica.com
Power Plug
Camera
Video
Cut loop for non-mirror image
Camera
Video
Cut loop to disable grid line
WWW.VISIONTECHAMERICA.COM
Holesaw 24' Male to male
RCA cable
4. Installation Tip
1. Select suitalbe flat position
near the license plate light
and mark it.
3. Mount the camera into the
hole using your two thumbs to
press it evenly for tight and flat
mounting
White
Blue
USER'S MANUAL
Model: VTK380HD
EMBEDDED STYLE
Allen Key
2. Drill a hole according to the
the camera diameter
4. Read section #3 for wiring
help.
If using the camera as front
camera, cut the white loop
to get non-mirror image.
If using the camera as rear
view camera, do not cut the
white loop.
Cut the blue loop to turn off
the parking assist grid lines.